a) No
special tools are required.
b) Ensure
the stick is clean and dry. Each label is shipped with an
alcohol cleaning swab! The stick may also be cleaned with a
clean paper towel saturated with isopropyl alcohol (IPA). If
using 99% IPA mix it in a ratio of 2 parts water to 1 part IPA.
If using rubbing alcohol, do not dilute it.
c) Wipe with a
lint free paper towel before the IPA evaporates from the
stick. As the paper towel becomes dirty, discard it. A
dirty towel does not remove dirt.
d) Make sure the
stick is completely dry.
e)
Peel the
sticker from the backing paper and carefully position one
edge along the stick. Use your finger to slowly press
the sticker down to the stick, squeezing out any air bubbles
that may be present. Once the sticker has been
applied, use firm pressure to activate the adhesive.
